Exhibition

Inflatable Projector Screen




547.jpgThe projection frame is made from PVC coated fabric layers joined by high frequency welding or mechanical sewing. The projection surface can be made of PVC or spandex, which later providing for rear projection capabilities. The projection surface can be detachable for ease of care. The frame is inflated with a high pressure air blower. Larger frames may require a three phase blower. For bigger screens, the blower typically continues to operate, ensuring the screen remains fully inflated. For consumer market and smaller screen sizes, the screen is sealed and does not require constantly operating air blower.67867.jpg85686.jpg6346345.jpg

Screens can be held upright with help of a supporting structure (A-frame or inflatable legs), or just with the system of straps and counter weights.

In comparison to traditional and heavy steel constructions, inflatable screens can be set up only a few hours before a movie, with the smallest screens taking just one minute to inflate. This can be useful for environments where wind or other dangerous weather may be a factor.[2] Inflatable screens can be deflated quickly in the case of high winds, adding significantly to their safety. Inflatable screens are lightweight and highly portable compared to other structures used to support screens like truss and scaffold. A 52'/16m wide screen usually fits on a single pallet. A truss or steel system takes up an entire truck.[3]Inflatable screens reach sizes up to 6,000 square feet (560 m2).[4] The projection surface stays flat regardless of environment due to recent improvements.

1.jpg789078.jpg

Our products are in real time:



If you are interested in our products, please contact us

Guangzhou Tianhong Inflatable Products Co., Ltd

Add: No.8 Zhuanchang Road, Zhongyi Industrial Area, Zhongcun Town, Panyu, Guangzhou, Guangdong

Contact us: lydia xu

Tel: 86-20-39901551

Mobile: 86-13360582111

E-mail: thqm2002@163.com


http://www.saygoodtoys.com/